Custom Wireless
Controls for
Roll-Tarp Systems
Forward/reverse motor control, adjustable speed, current-sensing auto-stop, backup controls, and a branded handheld remote—all built on a platform we can configure around your tarp system.
Step 1: START WITH THE OPERATOR
Tarps Need More Than Wireless Open and Close
A good tarp control should do more than move the motor. We configure the handheld, receiver, indicators, and control logic around the problems operators face in the field—then brand the complete system as your own.
Keep Working When the Remote Goes Missing
Local Open/Close controls at the receiver keep the tarp usable without the handheld.
Stop Before Something Breaks
Adjustable current sensing can detect end of travel, binding, or overload and stop the motor.
Know What the System Is Doing
LED feedback can show motor activity, wireless communication, low voltage, and fault conditions.
No detailed controller specification required. Just show us how your tarp works today.
Step 2: DEMO IT ON YOUR TARP
Request A Demo
We configure a working demo around your motor, system voltage, and existing controls. Test the range, slow-start & auto-stop behavior, and feedback on your own equipment before anything is finalized for production.
Fit It to Your System
Configure the harnesses, current settings, and operating logic around your equipment.
Test the Real-World Behavior
Try the wireless range, local controls, auto-stop, and status feedback.
Adjust It Before Production
Tune the behavior and approve what goes into the finished product.
Step 3: MOVE INTO REPEAT PRODUCTION
Designed, Built, and Tested in the USA
Once the demo is approved, the same team builds the electronics, programs the firmware, assembles the enclosure, applies your branding, and tests the finished units before shipment.
Built In Our Facility
The receiver, remote, harnesses, and branded graphics come together as one finished product under one roof.
Quality Test On Every Unit
Your approved settings and control behavior are loaded and functionally checked.
Reorder the Approved Version
Your documented build stays ready for repeat orders, product changes, and future platform updates.
Built for the Companies That Build, Install, and Sell Roll-Tarp Systems
Whether you manufacture the tarp, build the trailer, or install the finished system, we configure the receiver, handheld remote, wiring, branding, and control behavior around the products you already offer.
ADD WIRELESS TO YOUR PRODUCT LINE
Roll-Tarp Manufacturers
Offer a branded wireless control system designed around your tarp, motor, wiring, and operating sequence.
INTEGRATE THE COMPLETE SYSTEM
Trailer & Equipment OEMs
Make wireless tarp control part of the complete equipment package instead of relying on a separate, one-size-fits-all accessory.
OFFER A BETTER WIRELESS OPTION
Installers, Upfitters & Distributors
Give customers a configurable system you can install, support, and offer under your own name.
Built for repeatable production installation programs—not one-off replacement-remote purchases.
Need More Functionality?
Re-Engineer What Goes Inside
We reuse proven circuits and firmware, then configure the power, outputs, communication, and protection around your application.
Electrohydraulics • Solenoid valves • Bidirectional motors • Current sensing
CAN bus • USB-C • RS-485 / RS-232 • Engine ignition control
Faster than starting from nothing. More flexible than an off-the-shelf box.
READY TO SEE IT WORK?
Let’s Build a Demo Around Your Tarp System
Tell us who you are. We’ll reach out to understand your motor, existing controls, and what you want to prove with a working demo.
- ✓ Start with a conversation
- ✓ No finished specification required
- ✓ A real Henway engineer will follow up
Request a Demo
No automated quote portal. Just a real conversation.